Generic Storage System Architecture

The above diagram shows a generic stand-alone storage system architecture, where a storage OS is installed over a bare metal server and thus making it a storage server. Here I am using an enterprise class storage OS named Open-E DSS V7 which is installed on a Dell PowerEdge R720xd. R720xd can have up to twelve 3.5" drives at the front plus two 2.5" drives at the rear. Here in the diagram, the last 2 disks (Disk Group03) are 2.5" drives installed at the rear and being used as OS drive in RAID1. Apart from that we have five SAS 7.2K and 15K disks that are grouped into two RAID groups. Comparing the disk IOPS 'Disk Group01' can be considered fast and 'Disk Group02' as slow.

As I haven't mentioned the size of each SAS disk, lets assume using 'Disk Group01' a 10TB RAID5 virtual disk (VD) is created and using 'Disk Group02' a 12TB RAID5 VD is created. You can configure hot spares for each disk group if you have additional disks. As I mentioned above, for OS installation we have created a 10GB RAID1 VD using 'Disk Group03'. After installation of the OS (Open-E DSS V7), it scans and shows 10TB and 12TB as available storage units. 

Now the next step is to create volume groups. Here we created two volume groups (VG00 and VG01) to differentiate fast and slow storage. 

• VG00 uses VD01
• VG01 uses VD02

Once volume groups are created, you can now carve out LUNs separately based on your requirements. For example, if you want a LUN that is going to be used as a datastore to store your virtual machines, then you can create it on VG00 (fast), or if you need it for storing some general purpose backup files, then you can create it on VG01 (slow). So depending on your requirement you can decide where to create your LUN.

Note: Here I classified RAID disk groups based on speed. You can divide it based on reads and writes. So that you can choose RAID10 disk group for write intensive operations and RAID5 disk group for reads. It can even be divided based on access type. That means a disk group exclusively for sequential file access (SQL logs) and another disk group for random access (SQL data, VM datastore etc).