Sunday, November 13, 2022

vSphere with Tanzu using NSX-T - Part20 - Safely deleting NotReady nodes from a TKC

In this article we will look at a TKC that is stuck at updating phase which has multiple Kubernetes nodes in NotReady state. 

jtimothy-napp01     gc    updating       2021-07-29T16:59:34Z   v1.20.9+vmware.1-tkg.1.a4cee5b     3     3

❯ gcc kg no | grep NotReady | wc -l
5

❯ gcc kg no
NAME STATUS ROLES AGE VERSION
gc-control-plane-2rbsb Ready control-plane,master 410d v1.20.9+vmware.1
gc-control-plane-5zjn4 Ready control-plane,master 123d v1.20.9+vmware.1
gc-control-plane-9t97w Ready control-plane,master 123d v1.20.9+vmware.1
gc-control-plane-tnhv9 NotReady                    control-plane,master 63d v1.20.9+vmware.1
gc-control-plane-tqvnk NotReady                   control-plane,master 50d v1.20.9+vmware.1
gc-control-plane-wsclb NotReady                   <none> 8d v1.20.9+vmware.1
gc-control-plane-wt6sx NotReady                   <none> 30d v1.20.9+vmware.1
gc-control-plane-zthnq NotReady                   control-plane,master 49d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl Ready <none> 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p Ready <none> 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 Ready <none> 458d v1.20.9+vmware.1

❯ gcc kg po -A -o wide | grep etcd
kube-system etcd-gc-control-plane-2rbsb 0/1 Running 811 410d 172.31.14.6 gc-control-plane-2rbsb <none> <none>
kube-system etcd-gc-control-plane-5zjn4 1/1 Running 1 124d 172.31.14.7 gc-control-plane-5zjn4 <none> <none>
kube-system etcd-gc-control-plane-9t97w 1/1 Running 1 123d 172.31.14.8 gc-control-plane-9t97w <none> <none>

Note: gcc is alias that I am using for KUBECONFIG=gckubeconfig, where gckubeconfig is the kubeconfig file for the TKC under consideration.

Lets verify where etcd pods are running.

❯ gcc kg po -A -o wide | grep etcd
kube-system etcd-gc-control-plane-2rbsb 0/1 Running 811 410d 172.31.14.6 gc-control-plane-2rbsb <none> <none>
kube-system etcd-gc-control-plane-5zjn4 1/1 Running 1 124d 172.31.14.7 gc-control-plane-5zjn4 <none> <none>
kube-system etcd-gc-control-plane-9t97w 1/1 Running 1 123d 172.31.14.8 gc-control-plane-9t97w <none> <none>

You can see etcd pods are running on nodes that are in Ready status. So now we can go ahead and safely drain and delete the nodes that are NotReady.

❯ notreadynodes=$(gcc kubectl get nodes | grep NotReady | awk '{print $1;}')

❯ echo $notreadynodes
gc-control-plane-tnhv9
gc-control-plane-tqvnk
gc-control-plane-wsclb
gc-control-plane-wt6sx
gc-control-plane-zthnq

❯ echo "$notreadynodes" | while IFS= read -r line ; do echo $line; gcc kubectl drain $line --ignore-daemonsets; gcc kubectl delete node $line; echo "----"; done

gc-control-plane-tnhv9
node/gc-control-plane-tnhv9 already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-nzbgq, kube-system/kube-proxy-2jqqr, vmware-system-csi/vsphere-csi-node-46g6r
node/gc-control-plane-tnhv9 drained
node "gc-control-plane-tnhv9" deleted
----
gc-control-plane-tqvnk
node/gc-control-plane-tqvnk already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-45xfc, kube-system/kube-proxy-dxrkr, vmware-system-csi/vsphere-csi-node-wrvlk
node/gc-control-plane-tqvnk drained
node "gc-control-plane-tqvnk" deleted
----
gc-control-plane-wsclb
node/gc-control-plane-wsclb already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-5t254, kube-system/kube-proxy-jt2dp, vmware-system-csi/vsphere-csi-node-w2bhf
node/gc-control-plane-wsclb drained
node "gc-control-plane-wsclb" deleted
----
gc-control-plane-wt6sx
node/gc-control-plane-wt6sx already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-24pn5, kube-system/kube-proxy-b5vl5, vmware-system-csi/vsphere-csi-node-hfjdw
node/gc-control-plane-wt6sx drained
node "gc-control-plane-wt6sx" deleted
----
gc-control-plane-zthnq
node/gc-control-plane-zthnq already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-vp895, kube-system/kube-proxy-8mg8n, vmware-system-csi/vsphere-csi-node-hs22g
node/gc-control-plane-zthnq drained
node "gc-control-plane-zthnq" deleted
----

❯ gcc kg no
NAME STATUS ROLES AGE VERSION
gc-control-plane-2rbsb Ready control-plane,master 410d v1.20.9+vmware.1
gc-control-plane-5zjn4 Ready control-plane,master 123d v1.20.9+vmware.1
gc-control-plane-9t97w Ready control-plane,master 123d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl Ready <none> 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p Ready <none> 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 Ready <none> 458d v1.20.9+vmware.1

❯ kgtkca | grep jtimothy-napp01
jtimothy-napp01 gc updating 2021-07-29T16:59:34Z v1.20.9+vmware.1-tkg.1.a4cee5b 3 3

Now, I waited for few minutes to see whether the reconciliation process will proceed and change the status of the TKC from updating to running. But it was still stuck at updating phase. So I described the TKC.

Conditions:
Last Transition Time: 2022-12-30T19:47:15Z
Message: Rolling 1 replicas with outdated spec (2 replicas up to date)
Reason: RollingUpdateInProgress
Severity: Warning
Status: False
Type: Ready
Last Transition Time: 2023-01-01T19:19:45Z
Status: True
Type: AddonsReady
Last Transition Time: 2022-12-30T19:47:15Z
Message: Rolling 1 replicas with outdated spec (2 replicas up to date)
Reason: RollingUpdateInProgress
Severity: Warning
Status: False
Type: ControlPlaneReady
Last Transition Time: 2022-07-24T15:53:06Z
Status: True
Type: NodePoolsReady
Last Transition Time: 2022-09-01T09:02:26Z
Message: 3/3 Control Plane Node(s) healthy. 3/3 Worker Node(s) healthy
Status: True
Type: NodesHealthy

Checked vmop logs.

vmware-system-vmop/vmware-system-vmop-controller-manager-85d8986b94-xzd9h[manager]: E0103 08:43:51.449422       1 readiness_worker.go:111] readiness-probe "msg"="readiness probe fails" "error"="dial tcp 172.31.14.6:6443: connect: connection refused" "vmName"="jtimothy-napp01/gc-control-plane-2rbsb" "result"=-1

It says something is wrong with CP node gc-control-plane-2rbsb.
❯ gcc kg po -A -o wide | grep etcd
kube-system etcd-gc-control-plane-2rbsb 0/1 Running 811 410d 172.31.14.6 gc-control-plane-2rbsb <none> <none>
kube-system etcd-gc-control-plane-5zjn4 1/1 Running 1 124d 172.31.14.7 gc-control-plane-5zjn4 <none> <none>
kube-system etcd-gc-control-plane-9t97w 1/1 Running 1 123d 172.31.14.8 gc-control-plane-9t97w <none> <none>

You can see etcd pod is not running on first control plane node and is getting continuously restarted. So lets try to drain the CP node gc-control-plane-2rbsb.

❯ gcc k drain gc-control-plane-2rbsb
node/gc-control-plane-2rbsb cordoned
DEPRECATED WARNING: Aborting the drain command in a list of nodes will be deprecated in v1.23.
The new behavior will make the drain command go through all nodes even if one or more nodes failed during the drain.
For now, users can try such experience via: --ignore-errors
error: unable to drain node "gc-control-plane-2rbsb", aborting command...

There are pending nodes to be drained:
gc-control-plane-2rbsb
cannot delete DaemonSet-managed Pods (use --ignore-daemonsets to ignore): kube-system/calico-node-bdjp7, kube-system/kube-proxy-v9cqf, vmware-system-auth/guest-cluster-auth-svc-n4h2k, vmware-system-csi/vsphere-csi-node-djhpv
cannot delete Pods with local storage (use --delete-emptydir-data to override): vmware-system-csi/vsphere-csi-controller-b4fd6878d-zw5hn

❯ gcc k drain gc-control-plane-2rbsb --ignore-daemonsets --delete-emptydir-data
node/gc-control-plane-2rbsb already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-bdjp7, kube-system/kube-proxy-v9cqf, vmware-system-auth/guest-cluster-auth-svc-n4h2k, vmware-system-csi/vsphere-csi-node-djhpv
evicting pod vmware-system-csi/vsphere-csi-controller-b4fd6878d-zw5hn
pod/vsphere-csi-controller-b4fd6878d-zw5hn evicted
node/gc-control-plane-2rbsb evicted

❯ gcc kg no
NAME STATUS ROLES AGE VERSION
gc-control-plane-2rbsb Ready,SchedulingDisabled control-plane,master 410d v1.20.9+vmware.1
gc-control-plane-5zjn4 Ready control-plane,master 123d v1.20.9+vmware.1
gc-control-plane-9t97w Ready control-plane,master 123d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl Ready <none> 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p Ready <none> 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 Ready <none> 458d v1.20.9+vmware.1

Now lets delete its corresponding machine object.

❯ k delete machine.cluster.x-k8s.io/gc-control-plane-2rbsb -n jtimothy-napp01
machine.cluster.x-k8s.io "gc-control-plane-2rbsb" deleted

❯ kg machine -n jtimothy-napp01
NAME CLUSTER NODENAME PROVIDERID PHASE AGE VERSION
gc-control-plane-5zjn4 gc gc-control-plane-5zjn4 vsphere://42015c9c-feed-5eda-6fbe-f0da5d1434ea Running 124d v1.20.9+vmware.1
gc-control-plane-9t97w gc gc-control-plane-9t97w vsphere://4201377e-0f46-40b6-e222-9c723c6adb19 Running 123d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl gc gc-workers-ztr5c-6f4b555879-2v8pl vsphere://420139b4-83f1-824f-7bd2-ed073a5dcf37 Running 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p gc gc-workers-ztr5c-6f4b555879-8qs4p vsphere://4201d8ac-9cc2-07ac-c352-9f7e812b4367 Running 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 gc gc-workers-ztr5c-6f4b555879-r29d5 vsphere://42017666-8cb4-2767-5d0b-1d3dc9219db3 Running 458d v1.20.9+vmware.1

❯ gcc kg no
NAME STATUS ROLES AGE VERSION
gc-control-plane-5zjn4 Ready control-plane,master 124d v1.20.9+vmware.1
gc-control-plane-9t97w Ready control-plane,master 123d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl Ready <none> 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p Ready <none> 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 Ready <none> 458d v1.20.9+vmware.1


After few minutes you can see a new machine and the corresponding node got provisioned and the TKC changed from updating to running phase.

❯ kg machine -n jtimothy-napp01
NAME CLUSTER NODENAME PROVIDERID PHASE AGE VERSION
gc-control-plane-5zjn4 gc gc-control-plane-5zjn4 vsphere://42015c9c-feed-5eda-6fbe-f0da5d1434ea Running 124d v1.20.9+vmware.1
gc-control-plane-9t97w gc gc-control-plane-9t97w vsphere://4201377e-0f46-40b6-e222-9c723c6adb19 Running 123d v1.20.9+vmware.1
gc-control-plane-dnr66 gc Provisioning 13s v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl gc gc-workers-ztr5c-6f4b555879-2v8pl vsphere://420139b4-83f1-824f-7bd2-ed073a5dcf37 Running 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p gc gc-workers-ztr5c-6f4b555879-8qs4p vsphere://4201d8ac-9cc2-07ac-c352-9f7e812b4367 Running 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 gc gc-workers-ztr5c-6f4b555879-r29d5 vsphere://42017666-8cb4-2767-5d0b-1d3dc9219db3 Running 458d v1.20.9+vmware.1



❯ kg machine -n jtimothy-napp01
NAME CLUSTER NODENAME PROVIDERID PHASE AGE VERSION
gc-control-plane-5zjn4 gc gc-control-plane-5zjn4 vsphere://42015c9c-feed-5eda-6fbe-f0da5d1434ea Running 124d v1.20.9+vmware.1
gc-control-plane-9t97w gc gc-control-plane-9t97w vsphere://4201377e-0f46-40b6-e222-9c723c6adb19 Running 124d v1.20.9+vmware.1
gc-control-plane-dnr66 gc gc-control-plane-dnr66 vsphere://42011228-b156-3338-752a-e7233c9258dd Running 2m2s v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl gc gc-workers-ztr5c-6f4b555879-2v8pl vsphere://420139b4-83f1-824f-7bd2-ed073a5dcf37 Running 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p gc gc-workers-ztr5c-6f4b555879-8qs4p vsphere://4201d8ac-9cc2-07ac-c352-9f7e812b4367 Running 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 gc gc-workers-ztr5c-6f4b555879-r29d5 vsphere://42017666-8cb4-2767-5d0b-1d3dc9219db3 Running 458d v1.20.9+vmware.1

❯ gcc kg no
NAME STATUS ROLES AGE VERSION
gc-control-plane-5zjn4 Ready control-plane,master 124d v1.20.9+vmware.1
gc-control-plane-9t97w Ready control-plane,master 123d v1.20.9+vmware.1
gc-control-plane-dnr66 NotReady control-plane,master 35s v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl Ready <none> 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p Ready <none> 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 Ready <none> 458d v1.20.9+vmware.1


❯ gcc kg no
NAME STATUS ROLES AGE VERSION
gc-control-plane-5zjn4 Ready control-plane,master 124d v1.20.9+vmware.1
gc-control-plane-9t97w Ready control-plane,master 123d v1.20.9+vmware.1
gc-control-plane-dnr66 Ready control-plane,master 53s v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-2v8pl Ready <none> 458d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-8qs4p Ready <none> 456d v1.20.9+vmware.1
gc-workers-ztr5c-6f4b555879-r29d5 Ready <none> 458d v1.20.9+vmware.1

❯ kgtkca | grep jtimothy-napp01
jtimothy-napp01 gc running 2021-07-29T16:59:34Z v1.20.9+vmware.1-tkg.1.a4cee5b 3 3
Hope it was useful. Cheers!

Sunday, October 9, 2022

Working with Kubernetes using Python - Part 06 - Create namespace

Following code snipet uses Python client for the kubernetes API to create namespace. You will need to specify the kubeconfig file and the context to use for creating the namespace. This is an example case if you are working with multiple kubeconfig files where multiple K8s clusters could be present in each kubeconfig file.

from kubernetes import client, config
import argparse


def load_kubeconfig(kubeconfig_file, context_name):
try:
config.load_kube_config(
config_file=f"{kubeconfig_file}", context=f"{context_name}"
)
except config.ConfigException as err:
print(err)
raise Exception("Could not configure kubernetes python client!")
v1 = client.CoreV1Api()
return v1


def create_ns(v1, ns_name):
print("Creating namespace")
namespace = client.V1Namespace(metadata={"name": ns_name})
ret = v1.create_namespace(namespace)
print(ret)


def main():
parser = argparse.ArgumentParser()
parser.add_argument("-c", "--context", required=True, help="K8s context")
parser.add_argument("-f", "--file", required=True, help="Kubeconfig file")
args = parser.parse_args()

context = args.context

v1 = load_kubeconfig(args.file, context)

ns_name = input("Enter namespace name: ")
create_ns(v1, ns_name)


if __name__ == "__main__":
main()

Following is sample output:

❯ python3 create_namespace.py -c tkc-admin@tkc -f /Users/vineethac/testing/ccs/tkc.kubeconfig
Enter namespace name: vineethac-test11
Creating namespace
{'api_version': 'v1',
'kind': 'Namespace',
'metadata': {'annotations': None,
'cluster_name': None,
'creation_timestamp': datetime.datetime(2022, 12, 7, 11, 57, 17, tzinfo=tzutc()),
'deletion_grace_period_seconds': None,
'deletion_timestamp': None,
'finalizers': None,
'generate_name': None,
'generation': None,
'labels': {'kubernetes.io/metadata.name': 'vineetha-test11'},
'managed_fields': [{'api_version': 'v1',
'fields_type': 'FieldsV1',
'fields_v1': {'f:metadata': {'f:labels': {'.': {},
'f:kubernetes.io/metadata.name': {}}}},
'manager': 'OpenAPI-Generator',
'operation': 'Update',
'time': datetime.datetime(2022, 12, 7, 11, 57, 17, tzinfo=tzutc())}],
'name': 'vineethac-test11',
'namespace': None,
'owner_references': None,
'resource_version': '5518430',
'self_link': None,
'uid': '0e9f1211-e09f-4d2d-b475-8995bb0c0907'},
'spec': {'finalizers': ['kubernetes']},
'status': {'conditions': None, 'phase': 'Active'}}

Sunday, September 25, 2022

Working with Kubernetes using Python - Part 05 - Get pods

Following code snipet uses Python client for the kubernetes API to get all pods and pods under a specific namespace for a given context:

from kubernetes import client, config
import argparse


def load_kubeconfig(context_name):
config.load_kube_config(context=f"{context_name}")
v1 = client.CoreV1Api()
return v1


def get_all_pods(v1):
print("Listing all pods:")
ret = v1.list_pod_for_all_namespaces(watch=False)
for i in ret.items:
print(i.metadata.namespace, i.metadata.name, i.status.phase)


def get_namespaced_pods(v1, ns):
print(f"Listing all pods under namespace {ns}:")
ret = v1.list_namespaced_pod(f"{ns}")
for i in ret.items:
print(i.metadata.namespace, i.metadata.name, i.status.phase)


def main():
parser = argparse.ArgumentParser()
parser.add_argument("-c", "--context", required=True, help="K8s context")
parser.add_argument("-n", "--namespace", required=False, help="K8s namespace")
args = parser.parse_args()

context = args.context
v1 = load_kubeconfig(context)

if not args.namespace:
get_all_pods(v1)
else:
get_namespaced_pods(v1, args.namespace)


if __name__ == "__main__":
main()


Sunday, September 11, 2022

vSphere with Tanzu using NSX-T - Part19 - Troubleshooting TKC stuck at creating phase

This article provides basic troubleshooting steps for TKCs (Tanzu Kubernetes Cluster) stuck at creating phase.

Verify status of the TKC

  • Use the following commands to verify the TKC status.
kubectl get tkc -n <supervisor_namespace>
kubectl get tkc -n <supervisor_namespace> -o json
kubectl describe tkc <tkc_name> -n <supervisor_namespace>
kubectl get cluster-api -n <supervisor_namespace>
kubectl get vm,machine,wcpmachine -n <supervisor_namespace> 

Cluster health

  • Verify health of the supervisor cluster.
❯ kubectl get node
NAME STATUS ROLES AGE VERSION
4201a7b2667b0f3b021efcf7c9d1726b Ready control-plane,master 86d v1.22.6+vmware.wcp.2
4201bead67e21a8813415642267cd54a Ready control-plane,master 86d v1.22.6+vmware.wcp.2
4201e0e8e29b0ddb4b59d3165dd40941 Ready control-plane,master 86d v1.22.6+vmware.wcp.2
wxx-08-r02esx13.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx14.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx15.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx16.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx17.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx18.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx19.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx20.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx21.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx22.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx23.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46
wxx-08-r02esx24.xxxxxyyyy.com Ready agent 85d v1.22.6-sph-db56d46

❯ kubectl get --raw '/healthz?verbose'
[+]ping ok
[+]log ok
[+]etcd ok
[+]poststarthook/start-kube-apiserver-admission-initializer ok
[+]poststarthook/generic-apiserver-start-informers ok
[+]poststarthook/priority-and-fairness-config-consumer ok
[+]poststarthook/priority-and-fairness-filter ok
[+]poststarthook/start-apiextensions-informers ok
[+]poststarthook/start-apiextensions-controllers ok
[+]poststarthook/crd-informer-synced ok
[+]poststarthook/bootstrap-controller ok
[+]poststarthook/rbac/bootstrap-roles ok
[+]poststarthook/scheduling/bootstrap-system-priority-classes ok
[+]poststarthook/priority-and-fairness-config-producer ok
[+]poststarthook/start-cluster-authentication-info-controller ok
[+]poststarthook/aggregator-reload-proxy-client-cert ok
[+]poststarthook/start-kube-aggregator-informers ok
[+]poststarthook/apiservice-registration-controller ok
[+]poststarthook/apiservice-status-available-controller ok
[+]poststarthook/kube-apiserver-autoregistration ok
[+]autoregister-completion ok
[+]poststarthook/apiservice-openapi-controller ok
healthz check passed 

Terminating namespaces

  • Check for namespaces stuck at terminating phase. If there are any, properly clean them up by removing all child objects. 
  • You can use this kubectl get-all plugin to see all resources under a namespace.  Then clean them up properly. Mostly you need to set finalizers of remaining child resources to null. Following is a sample case where 2 PVCs where stuck at terminating and they were cleaned up by setting its finalizers to null.
❯ kg ns | grep Terminating
rgettam-gettam Terminating 226d

❯ k get-all -n rgettam-gettam
NAME NAMESPACE AGE
persistentvolumeclaim/58ef0d27-ba66-4f4e-b4d7-43bd1c4fb833-c8c0c111-e480-4df4-baf8-d140d0237e1d rgettam-gettam 86d
persistentvolumeclaim/58ef0d27-ba66-4f4e-b4d7-43bd1c4fb833-e5c99b7e-1397-4a9d-b38c-53a25cab6c3f rgettam-gettam 86d

❯ kg pvc -n rgettam-gettam
NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE
58ef0d27-ba66-4f4e-b4d7-43bd1c4fb833-c8c0c111-e480-4df4-baf8-d140d0237e1d Terminating pvc-bd4252fb-bfed-4ef3-ab5a-43718f9cbed5 8Gi RWO sxx-01-vcxx-wcp-mgmt 86d
58ef0d27-ba66-4f4e-b4d7-43bd1c4fb833-e5c99b7e-1397-4a9d-b38c-53a25cab6c3f Terminating pvc-8bc9daa1-21cf-4af2-973e-af28d66a7f5e 30Gi RWO sxx-01-vcxx-wcp-mgmt 86d

❯ kg pvc -n rgettam-gettam --no-headers | awk '{print $1}' | xargs -I{} kubectl patch -n rgettam-gettam pvc {} -p '{"metadata":{"finalizers": null}}'
  • You can also do kubectl get namespace <namespace> -oyaml and the status section will show if there are resources/ content to be deleted or any finalizers remaining.
  • Verify vmop-controller pod logs, and restart them if required.

IP_BLOCK_EXHAUSTED

  • Check CIDR usage of the supervisor cluster.
❯ kg clusternetworkinfos
NAME                                                AGE
domain-c1006-06046c54-c9e5-41aa-bc2c-52d72c05bce4   160d

❯ kg clusternetworkinfos domain-c1006-06046c54-c9e5-41aa-bc2c-52d72c05bce4 -o json | jq .usage
{
  "egressCIDRUsage": {
    "allocated": 33,
    "total": 1024
  },
  "ingressCIDRUsage": {
    "allocated": 42,
    "total": 1024
  },
  "subnetCIDRUsage": {
    "allocated": 832,
    "total": 1024
  }
} 
  • When the IP blocks of supervisor cluster are exhausted, you will find the following warning when you describe the TKC.
 Conditions:
    Last Transition Time:  2022-10-05T18:34:35Z
    Message:               Cannot realize subnet
    Reason:                ClusterNetworkProvisionFailed
    Severity:              Warning
    Status:                False
    Type:                  Ready 
  • Also when you check the namespace, you can see the following ncp error IP_BLOCK_EXHAUSTED.
 ❯ kg ns tsql-integration-test -oyaml
apiVersion: v1
kind: Namespace
metadata:
  annotations:
    calaxxxx.xxxyy.com/xxxrole-created: "1"
    ncp/error: IP_BLOCK_EXHAUSTED
    ncp/router_id: t1_d0a2af0f-8430-4250-9fcf-807a4afe51aa_rtr
    vmware-system-resource-pool: resgroup-307480
    vmware-system-vm-folder: group-v307481
  creationTimestamp: "2022-10-05T17:35:18Z"

Notes:

  • If the subnetCIDRUsage IP block is exhausted, you may need to remove some old/ unused namespaces, and that will release some IPs. If that is not possible, you may need to consider adding new subnet.
  • After removing the old/ unused namespaces, and even if IPs are available, sometimes the TKCs will be stuck at creating phase! In that case, check the ncp, vmop, and capw controller pods and you may need to restart them. What I observed is usually after restart of ncp pod, vmop-controller pods, and all pods under vmware-system-capw namespaces the VMs will start getting deployed and the TKC creation will progress and complete successfully.

Resource availability

  • Check whether there are enough resources available in the cluster.
LAST SEEN  TYPE   REASON       OBJECT                    MESSAGE
3m23s    Warning  UpdateFailure   virtualmachine/magna3-control-plane-9rhl4   The host does not have sufficient CPU resources to satisfy the reservation.
80s     Warning  ReconcileFailure  wcpmachine/magna3-control-plane-s5s9t-p2cxj  vm is not yet powered on: vmware-system-capw-controller-manager/WCPMachine//chakravartha-magna3/magna3/magna3-control-plane-s5s9t-p2cxj 

  • Check for resource limits applied to the namespace.

Check whether storage policy is assigned to the namespace

27m         Warning   ReconcileFailure               wcpmachine/gc-pool-0-cv8vz-5snbc          admission webhook "default.validating.virtualmachine.vmoperator.xxxyy.com" denied the request: StorageClass wdc-10-vc21c01-wcp-pod is not assigned to any ResourceQuotas in namespace mpereiramaia-demo2

  • In this case, the storage policy wasnt assigned to the ns. I assigned the storage policy wdc-10-vc21c01-wcp-pod to the respective namespace, and the TKC deployment was successful.

Check Content library can sync properly

  • Sometimes issues related to CL can cause TKCs to get stuck at creating phase! Check this blog post for more details.

KCP can't remediate

Message:               KCP can't remediate if current replicas are less or equal then 1
Reason:                WaitingForRemediation @ Machine/gc-control-plane-zpssc
Severity:              Warning
  • In this case, you can just edit the TKC spec, change the control plane vmclass to a different class and save. Once the deployment is complete and TKC is running, edit the TKC spec again and revert the vmclass that you modified earlier to its original class. This process will re-provision the control plane.

TKC VMs waiting for IP

  • In this case, take a look at NSXT and check whether all Edge nodes are healthy. If there are mismatch errors, resolve them.
  • You may also check ncp pod logs and restart ncp pod if required.

VirtualMachineClassBindingNotFound

Conditions:
    Last Transition Time:  2021-05-05T18:19:10Z
    Message:               1 of 2 completed
    Reason:                VirtualMachineClassBindingNotFound @ Machine/tkc-dev-control-plane-wxd57
    Severity:              Error
    Status:                False
    Message:               0/1 Control Plane Node(s) healthy. 0/2 Worker Node(s) healthy
Events:
  Normal  PhaseChanged  7m22s  vmware-system-tkg/vmware-system-tkg-controller-manager/tanzukubernetescluster-status-controller  cluster changes from creating phase to failed phase

  • This happens when the virtualmachineclassbindings are missing and can be resolved by adding all/ required VM Class to the Namespace using the vSphere Client. Following are the steps to add VM Classes to a namespace:
  • Log into vCenter web UI
  • From Hosts and Clusters > Select the namespace > Summary tab > VM Service tile > Click Manage VM Classes
  • Select all required VM Classes and click OK

Verify NSX-T objects

  • Issues at the NSX-T side can also cause the TKC to be stuck at creating phase. Following is a sample case and you can see these logs when you describe the TKC:
Message: 2 errors occurred:
* failed to configure DNS for /, Kind= namespace-test-01/gc: unable to reconcile kubeadm ConfigMap's CoreDNS info: unable to retrieve kubeadm Configmap from the guest cluster: configmaps "kubeadm-config" not found * failed to configure kube-proxy for /, Kind= namespace-test-01/gc: unable to retrieve kube-proxy daemonset from the guest cluster: daemonsets.apps "kube-proxy" not found
  • In this case, these were some issues with the virtual servers in loadbalancer. Some stale entries of virtual servers were still present and their IP didn't get removed properly and it was causing some intermittent connectivity issues to some of the other services of type loadbalancer. And, new TKC deployment within that affected namespace also gets stuck due to this. In our case we deleted the affected namespace, and recreated it, that cleaned up all those virtual server state entries and the load balancer, and new TKC deployments were successful. So it will be worth to check on the health and staus of NSX-T objects in case you have TKC deployment issues.

Check for broken TKCs in the cluster

  • Sometimes the TKC deployments are very slow and takes more than 30 minutes. In this case, you may notice that the first control plane VM will get deployed in like 30-45 minutes after the TKC creation has started. Look for vmop controller logs. Following is sample log:
❯ kail -n vmware-system-vmop
vmware-system-vmop/vmware-system-vmop-controller-manager-55459cb46b-2psrk[manager]: E1027 11:49:44.725620       1 readiness_worker.go:111] readiness-probe "msg"="readiness probe fails" "error"="dial tcp 172.29.9.212:6443: connect: connection refused" "vmName"="ciroscosta-cartographer/kontinue-control-plane-svlk4" "result"=-1

vmware-system-vmop/vmware-system-vmop-controller-manager-55459cb46b-2psrk[manager]: E1027 11:49:49.888653       1 readiness_worker.go:111] readiness-probe "msg"="readiness probe fails" "error"="dial tcp 172.29.2.66:6443: connect: connection refused" "vmName"="whaozhe-platform/gc-control-plane-mf4p5" "result"=-1

  • In the above case, two of the TKCs were broken/ stuck at updating phase and we were unable to connect to its control plane.
ciroscosta-cartographer    kontinue    updating       2021-10-29T18:47:46Z   v1.20.9+vmware.1-tkg.1.a4cee5b    1     2
whaozhe-platform           gc          updating       2022-01-27T03:59:31Z   v1.20.12+vmware.1-tkg.1.b9a42f3   1     10
  • After removing the namespaces with broken TKCs, new deployments were completing succesfully. 

Restart system pods

  • Sometimes restart of some of the system controller pods resoves the issue. I usually delete all the pods of the following namespaces and they will get restarted in a few seconds.
k delete pod --all --namespace=vmware-system-vmop
k delete pod --all --namespace=vmware-system-capw
k delete pod --all --namespace=vmware-system-tkg
k delete pod --all --namespace=vmware-system-csi
k delete pod --all --namespace=vmware-system-nsx

Hope this was useful. Cheers!

Saturday, August 13, 2022

vSphere with Tanzu using NSX-T - Part18 - Troubleshooting vSphere pods with ProviderFailed status

In this article, we will take a look at fixing vSphere pods with ProviderFailed status. Following is an example:

svc-opa-gatekeeper-domain-c61                 gatekeeper-controller-manager-5ccbc7fd79-5gn2n                    0/1     ProviderFailed     0          2d14h
svc-opa-gatekeeper-domain-c61 gatekeeper-controller-manager-5ccbc7fd79-5jtvj 0/1 ProviderFailed 0 2d13h
svc-opa-gatekeeper-domain-c61 gatekeeper-controller-manager-5ccbc7fd79-5whtt 0/1 ProviderFailed 0 2d14h
svc-opa-gatekeeper-domain-c61 gatekeeper-controller-manager-5ccbc7fd79-6p2zv 0/1 ProviderFailed 0 2d13h
svc-opa-gatekeeper-domain-c61 gatekeeper-controller-manager-5ccbc7fd79-7r92p 0/1 ProviderFailed 0 2d14h
When describing the pod, you can see the message "Unable to find backing for logical switch".

❯ kd po gatekeeper-controller-manager-5ccbc7fd79-5gn2n -n svc-opa-gatekeeper-domain-c61
Name: gatekeeper-controller-manager-5ccbc7fd79-5gn2n
Namespace: svc-opa-gatekeeper-domain-c61
Priority: 2000000000
Priority Class Name: system-cluster-critical
Node: esx-1.sddc-35-82-xxxxx.xxxxxxx.com/
Labels: control-plane=controller-manager
gatekeeper.sh/operation=webhook
gatekeeper.sh/system=yes
pod-template-hash=5ccbc7fd79
Annotations: attachment_id: 668b681b-fef6-43e5-8009-5ac8deb6da11
kubernetes.io/psp: wcp-default-psp
mac: 04:50:56:00:08:1e
vlan: None
vmware-system-ephemeral-disk-uuid: 6000C297-d1ba-ce8c-97ba-683a3c8f5321
vmware-system-image-references: {"manager":"gatekeeper-111fd0f684141bdad12c811b4f954ae3d60a6c27-v52049"}
vmware-system-vm-moid: vm-89777:750f38c6-3b0e-41b7-a94f-4d4aef08e19b
vmware-system-vm-uuid: 500c9c37-7055-1708-92d4-8ffdf932c8f9
Status: Failed
Reason: ProviderFailed
Message: Unable to find backing for logical switch 03f0dcd4-a5d9-431e-ae9e-d796ddca0131: timed out waiting for the condition Unable to find backing for logical switch: 03f0dcd4-a5d9-431e-ae9e-d796ddca0131
IP:
IPs: <none>
A workaround for this is to restart the spherelet service on the ESXi host where you see this issue. If there are multiple ESXi nodes having same issue, you could consider restarting the spherelet service on all ESXi worker nodes. In a production setup you may want to consider placing the ESXi in maintenance mode before restarting the spherelet service. In my case, we usually restart the spherelet service directly without placing the ESXi in MM. Following is the PowerCLI way to check/ restart spherelet service on ESXi worker nodes:
 

> Connect-VIServer wdc-10-vc21

> Get-VMHost | Get-VMHostService | where {$_.Key -eq "spherelet"} | select VMHost,Key,Running | ft

VMHost Key Running
------ --- -------
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True
wdc-10-r0xxxxxxxxxxxxxxxxxxxx spherelet True

> $sphereletservice = Get-VMHost wdc-10-r0xxxxxxxxxxxxxxxxxxxx | Get-VMHostService | where {$_.Key -eq "spherelet"}
> Stop-VMHostService -HostService $sphereletservice

Perform operation?
Perform operation Stop host service. on spherelet?
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): Y

Key Label Policy Running Required
--- ----- ------ ------- --------
spherelet spherelet on False False

> Get-VMHost wdc-10-r0xxxxxxxxxxxxxxxxxxxx | Get-VMHostService | where {$_.Key -eq "spherelet"}

Key Label Policy Running Required
--- ----- ------ ------- --------
spherelet spherelet on False False

> Start-VMHostService -HostService $sphereletservice

Key Label Policy Running Required
--- ----- ------ ------- --------
spherelet spherelet on True False

To restart spherelet service on all ESXi worker nodes of a cluster:
> Get-Cluster

Name HAEnabled HAFailover DrsEnabled DrsAutomationLevel
Level
---- --------- ---------- ---------- ------------------
wdc-10-vcxxc01 True 1 True FullyAutomated

> Get-Cluster -Name wdc-10-vcxxc01 | Get-VMHost | foreach { Restart-VMHostService -HostService ($_ | Get-VMHostService | where {$_.Key -eq "spherelet"}) }

After restarting the spherelet service, new pods will come up fine and be in Running status. But you may need to clean up all those pods with ProviderFailed status using kubectl. 
kubectl get pods -A | grep ProviderFailed | awk '{print $2 " --namespace=" $1}' | xargs kubectl delete pod

Hope it was useful. Cheers!

Saturday, July 30, 2022

vSphere with Tanzu using NSX-T - Part17 - Troubleshooting TKCs stuck at updating phase

Ideally if everything goes well the TKCs (Tanzu Kubernetes Cluster aka Guest Cluster)  should be in running phase. But sometimes due to several reasons it may be stuck at updating phase. In this article, we will take a sample case and look at troubleshooting/ fixing it. 

Following is an example:

NAMESPACE              NAME                    PHASE      CREATIONTIME           VERSION                           CP    WORKER
karvea-vc17ns11 sc201vc17pace updating 2021-11-19T12:17:24Z v1.20.9+vmware.1-tkg.1.a4cee5b 1 4

Lets connect to this TKC. Here I have a small plugin (kubectl-gckc) that generates the TKC kubeconfig and gcc is alias to KUBECONFIG=gckubeconfig, where gckubeconfig is the TKC admin kubeconfig file.
❯ k gckc karvea-vc17ns11 sc201vc17pace
❯ gcc kg no
NAME STATUS ROLES AGE VERSION
sc201vc17pace-control-plane-zt99l Ready control-plane,master 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz Ready,SchedulingDisabled <none> 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw Ready,SchedulingDisabled <none> 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv Ready <none> 139d v1.20.9+vmware.1

❯ kg vm -n karvea-vc17ns11
NAME POWERSTATE AGE
sc201vc17pace-control-plane-zt99l poweredOn 139d
sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz poweredOn 189d
sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw poweredOn 189d
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt poweredOn 139d
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp poweredOn 139d
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 poweredOn 139d
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv poweredOn 139d



❯ kg machine -n karvea-vc17ns11
NAME CLUSTER NODENAME PROVIDERID PHASE AGE VERSION
sc201vc17pace-control-plane-zt99l sc201vc17pace sc201vc17pace-control-plane-zt99l vsphere://4201e660-3124-9aa5-4ec2-6fbc2ff3ecea Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz sc201vc17pace sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz vsphere://42010982-8b25-ad7b-2a1d-bb949def4834 Deleting 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw sc201vc17pace sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw vsphere://4201a640-2b39-3d66-5a26-db95a612f6e5 Deleting 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt vsphere://42013a9b-dffb-4609-89d6-4ca123c4dc1e Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp vsphere://4201160b-21c9-ccc2-6826-e3545e34b490 Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 vsphere://420125a8-e45c-04b7-5612-ce3149e86d74 Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv vsphere://4201238f-c9a3-a9b2-9c31-4ed99318bd30 Running 139d v1.20.9+vmware.1


As you can see above, there are two worker machines that are stuck at Deleting phase. It is because the corresponding two worker nodes are at Ready, SchedulingDisabled status. The nodes are not drained yet due to some reason. Once they get drained properly, its status will be changed to NotReady, SchedulingDisabled. Now lets try to drain those worker nodes manually.
❯ gcc k drain sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz
node/sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz already cordoned
DEPRECATED WARNING: Aborting the drain command in a list of nodes will be deprecated in v1.23.
The new behavior will make the drain command go through all nodes even if one or more nodes failed during the drain.
For now, users can try such experience via: --ignore-errors
error: unable to drain node "sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz", aborting command...

There are pending nodes to be drained:
sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz
cannot delete DaemonSet-managed Pods (use --ignore-daemonsets to ignore): kube-system/calico-node-wqlmq, kube-system/kube-proxy-78z5k, nsxi-platform/nsxi-platform-fluent-bit-pdzjx, projectcontour/projectcontour-envoy-r9pg7, vmware-system-csi/vsphere-csi-node-p2gtd
cannot delete Pods with local storage (use --delete-emptydir-data to override): nsxi-platform/kafka-2

❯ gcc k drain sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz --ignore-daemonsets --delete-emptydir-data
node/sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-wqlmq, kube-system/kube-proxy-78z5k, nsxi-platform/nsxi-platform-fluent-bit-pdzjx, projectcontour/projectcontour-envoy-r9pg7, vmware-system-csi/vsphere-csi-node-p2gtd
evicting pod nsxi-platform/kafka-2
error when evicting pods/"kafka-2" -n "nsxi-platform" (will retry after 5s): Cannot evict pod as it would violate the pod's disruption budget.
evicting pod nsxi-platform/kafka-2
error when evicting pods/"kafka-2" -n "nsxi-platform" (will retry after 5s): Cannot evict pod as it would violate the pod's disruption budget.
^C
❯ gcc kg pdb
No resources found in default namespace.
❯ gcc kg pdb -A
NAMESPACE NAME MIN AVAILABLE MAX UNAVAILABLE ALLOWED DISRUPTIONS AGE
nsxi-platform kafka N/A 1 0 188d
nsxi-platform zookeeper N/A 1 1 188d


Here this worker  node sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz is not getting drained because of the presence of a pod disruption budget (pdb). So, in-order to drain the node, I am taking a back up of the pdb yaml file and delete it. And once the nodes are drained, I will apply the pdb yaml back on to the cluster.
❯ gcc kg pdb -n nsxi-platform kafka -oyaml > pdb-nsxi-platform-kafka.yaml
❯ code pdb-nsxi-platform-kafka.yaml
❯ gcc kg pdb -n nsxi-platform zookeeper -oyaml > pdb-nsxi-platform-zookeeper.yaml
❯ code pdb-nsxi-platform-zookeeper.yaml

❯ gcc k delete pdb kafka -n nsxi-platform
poddisruptionbudget.policy "kafka" deleted
❯ gcc kg pdb -A
NAMESPACE NAME MIN AVAILABLE MAX UNAVAILABLE ALLOWED DISRUPTIONS AGE
nsxi-platform zookeeper N/A 1 1 188d

❯ gcc k drain sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz --ignore-daemonsets --delete-emptydir-data
node/sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-wqlmq, kube-system/kube-proxy-78z5k, nsxi-platform/nsxi-platform-fluent-bit-pdzjx, projectcontour/projectcontour-envoy-r9pg7, vmware-system-csi/vsphere-csi-node-p2gtd
evicting pod nsxi-platform/kafka-2
pod/kafka-2 evicted
node/sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz evicted


❯ gcc k drain sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz --ignore-daemonsets --delete-emptydir-data
node/sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-wqlmq, kube-system/kube-proxy-78z5k, nsxi-platform/nsxi-platform-fluent-bit-pdzjx, projectcontour/projectcontour-envoy-r9pg7, vmware-system-csi/vsphere-csi-node-p2gtd
node/sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz drained


❯ gcc k drain sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw
node/sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw already cordoned
DEPRECATED WARNING: Aborting the drain command in a list of nodes will be deprecated in v1.23.
The new behavior will make the drain command go through all nodes even if one or more nodes failed during the drain.
For now, users can try such experience via: --ignore-errors
error: unable to drain node "sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw", aborting command...

There are pending nodes to be drained:
sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw
error: cannot delete DaemonSet-managed Pods (use --ignore-daemonsets to ignore): kube-system/calico-node-4tz4x, kube-system/kube-proxy-q726d, nsxi-platform/nsxi-platform-fluent-bit-b24nn, projectcontour/projectcontour-envoy-rppkx, vmware-system-csi/vsphere-csi-node-mpbsh
❯ gcc k drain sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw --ignore-daemonsets
node/sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw already cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-4tz4x, kube-system/kube-proxy-q726d, nsxi-platform/nsxi-platform-fluent-bit-b24nn, projectcontour/projectcontour-envoy-rppkx, vmware-system-csi/vsphere-csi-node-mpbsh
node/sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw drained
The worker nodes are now drained.
❯ gcc kg no
NAME STATUS ROLES AGE VERSION
sc201vc17pace-control-plane-zt99l Ready control-plane,master 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-pn6vz NotReady,SchedulingDisabled <none> 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw NotReady,SchedulingDisabled <none> 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv Ready <none> 139d v1.20.9+vmware.1

❯ gcc kg no
NAME STATUS ROLES AGE VERSION
sc201vc17pace-control-plane-zt99l Ready control-plane,master 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw NotReady,SchedulingDisabled <none> 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv Ready <none> 139d v1.20.9+vmware.1
As soon as the worker nodes are drained, one of them got successfully removed/ deleted, but the other worker node is still present. When we look at the machine resource, you can still see one of the worker machine is still stuck at Deleting phase. In this case I've manually deleted the worker node, still the corresponding worker machine is stuck at Deleting phase.
❯ kg machine -n karvea-vc17ns11
NAME CLUSTER NODENAME PROVIDERID PHASE AGE VERSION
sc201vc17pace-control-plane-zt99l sc201vc17pace sc201vc17pace-control-plane-zt99l vsphere://4201e660-3124-9aa5-4ec2-6fbc2ff3ecea Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw sc201vc17pace sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw vsphere://4201a640-2b39-3d66-5a26-db95a612f6e5 Deleting 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt vsphere://42013a9b-dffb-4609-89d6-4ca123c4dc1e Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp vsphere://4201160b-21c9-ccc2-6826-e3545e34b490 Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 vsphere://420125a8-e45c-04b7-5612-ce3149e86d74 Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv vsphere://4201238f-c9a3-a9b2-9c31-4ed99318bd30 Running 139d v1.20.9+vmware.1


❯ gcc k delete node sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw
node "sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw" deleted

❯ gcc kg no
NAME STATUS ROLES AGE VERSION
sc201vc17pace-control-plane-zt99l Ready control-plane,master 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 Ready <none> 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv Ready <none> 139d v1.20.9+vmware.1
Now lets describe the worker machine stuck at Deleting. In this case you can see that there are two PVCs stuck at Terminating status. So I  just edited those two PVCs yaml and set finalizer to null.
❯ kg machine -n karvea-vc17ns11
NAME CLUSTER NODENAME PROVIDERID PHASE AGE VERSION
sc201vc17pace-control-plane-zt99l sc201vc17pace sc201vc17pace-control-plane-zt99l vsphere://4201e660-3124-9aa5-4ec2-6fbc2ff3ecea Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw sc201vc17pace sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw vsphere://4201a640-2b39-3d66-5a26-db95a612f6e5 Deleting 189d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt vsphere://42013a9b-dffb-4609-89d6-4ca123c4dc1e Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp vsphere://4201160b-21c9-ccc2-6826-e3545e34b490 Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 vsphere://420125a8-e45c-04b7-5612-ce3149e86d74 Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv vsphere://4201238f-c9a3-a9b2-9c31-4ed99318bd30 Running 139d v1.20.9+vmware.1



❯ kg vm -n karvea-vc17ns11
NAME POWERSTATE AGE
sc201vc17pace-control-plane-zt99l poweredOn 139d
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt poweredOn 139d
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp poweredOn 139d
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 poweredOn 139d
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv poweredOn 139d


❯ kd machine sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw -n karvea-vc17ns11

Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal DetectedUnhealthy 13m (x2 over 17m) machinehealthcheck-controller Machine karvea-vc17ns11/sc201vc17pace-workers-jrcb6/sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw/sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw has unhealthy node sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw
Normal SuccessfulDrainNode 13m (x2 over 19m) machine-controller success draining Machine's node "sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw"
Normal NodeVolumesDetached 12m (x2 over 19m) machine-controller success waiting for node volumes detach Machine's node "sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw"
Normal MachineMarkedUnhealthy 106s (x4 over 9m58s) machinehealthcheck-controller Machine karvea-vc17ns11/sc201vc17pace-workers-jrcb6/sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw/sc201vc17pace-workers-jrcb6-5c7d9548f-w64lw has been marked as unhealthy

❯ kg pvc -n karvea-vc17ns11
NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE
a366a76b-2000-4d33-a817-a9c1b9e60b1b-1f4b5ee8-f378-445e-97d3-f4c4656863bb Bound pvc-1dc35d76-86c6-4a70-82e7-99609480a0b3 10Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-3509d39d-e632-492b-a0c4-b5b3874b01a6 Bound pvc-97e6e063-9a9e-4837-9999-284523379453 128Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-42a0f98e-0f9c-4fc1-bc9f-862e94086624 Bound pvc-be6bd318-140c-4cb8-9c22-daf9ec8dac65 128Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-48b9ddc4-41bc-4228-a6b5-0aea3a470811 Bound pvc-faa7798e-c045-420f-9d09-44674d9d2326 20Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-8c880e33-681a-4eae-a57d-3aaf0fb9c950 Bound pvc-cf1a6c2e-0e9e-425c-ae46-b010b086c325 10Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-aa196378-d10f-45ed-a528-b0d691ec6447 Bound pvc-49fca2f0-3402-429f-884f-7db9012934d6 8Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-bbe074ee-9ba3-4839-b519-af82214a9ad0 Bound pvc-3887e89c-0a5b-4d08-938b-c9cb0a1efaca 8Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-bfb23073-29e8-4f0d-b2c0-934ff808ad2c Bound pvc-f966f803-ca92-45b6-9395-8d1d24c67f8e 10Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-d39e8f9b-692e-46ac-a52c-2d977f0a95fa Bound pvc-25d7c8c2-7994-4ee8-9ef8-725ae1c8c8a1 8Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-ef1e2362-83bc-4af4-b748-a496aa911009 Bound pvc-7aefd3fe-3279-4e20-8a00-5ca60cc61e40 128Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-f072ee1b-034a-4ac8-965c-f66a2d8bd61c Bound pvc-276acbee-ba6c-4cc9-8bc5-e18525abd256 20Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
sc201vc17pace-workers-wswdh-2hz8w-containerd Bound pvc-e67e3a6f-99d6-4e21-813d-e9c9994b25d6 42Gi RWO sc2-01-vc17c01-wcp-mgmt 139d
sc201vc17pace-workers-wswdh-5pjrc-containerd Bound pvc-fb162388-4347-4f48-825e-c2c2d62ceb90 42Gi RWO sc2-01-vc17c01-wcp-mgmt 139d
sc201vc17pace-workers-wswdh-755m6-containerd Terminating pvc-da2e4866-bb41-4f74-a4b7-0f74bc7061a1 42Gi RWO sc2-01-vc17c01-wcp-mgmt 189d
sc201vc17pace-workers-wswdh-dgmjs-containerd Terminating pvc-64eac528-f160-444c-9a0f-0ed9f6393e06 42Gi RWO sc2-01-vc17c01-wcp-mgmt 189d
sc201vc17pace-workers-wswdh-djp2m-containerd Bound pvc-a7542552-de13-4670-ac45-84ed39c3c916 42Gi RWO sc2-01-vc17c01-wcp-mgmt 139d
sc201vc17pace-workers-wswdh-flwtt-containerd Bound pvc-1b8ee843-709a-4e2a-955d-a9a9a6a83c73 42Gi RWO sc2-01-vc17c01-wcp-mgmt 139d

As soon as the PVCs are removed, you can see the worker machine that was stuck at Deleting got removed, and the TKC chaged its status to running.
❯ kg pvc -n karvea-vc17ns11
NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE
a366a76b-2000-4d33-a817-a9c1b9e60b1b-1f4b5ee8-f378-445e-97d3-f4c4656863bb Bound pvc-1dc35d76-86c6-4a70-82e7-99609480a0b3 10Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-3509d39d-e632-492b-a0c4-b5b3874b01a6 Bound pvc-97e6e063-9a9e-4837-9999-284523379453 128Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-42a0f98e-0f9c-4fc1-bc9f-862e94086624 Bound pvc-be6bd318-140c-4cb8-9c22-daf9ec8dac65 128Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-48b9ddc4-41bc-4228-a6b5-0aea3a470811 Bound pvc-faa7798e-c045-420f-9d09-44674d9d2326 20Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-8c880e33-681a-4eae-a57d-3aaf0fb9c950 Bound pvc-cf1a6c2e-0e9e-425c-ae46-b010b086c325 10Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-aa196378-d10f-45ed-a528-b0d691ec6447 Bound pvc-49fca2f0-3402-429f-884f-7db9012934d6 8Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-bbe074ee-9ba3-4839-b519-af82214a9ad0 Bound pvc-3887e89c-0a5b-4d08-938b-c9cb0a1efaca 8Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-bfb23073-29e8-4f0d-b2c0-934ff808ad2c Bound pvc-f966f803-ca92-45b6-9395-8d1d24c67f8e 10Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-d39e8f9b-692e-46ac-a52c-2d977f0a95fa Bound pvc-25d7c8c2-7994-4ee8-9ef8-725ae1c8c8a1 8Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-ef1e2362-83bc-4af4-b748-a496aa911009 Bound pvc-7aefd3fe-3279-4e20-8a00-5ca60cc61e40 128Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
a366a76b-2000-4d33-a817-a9c1b9e60b1b-f072ee1b-034a-4ac8-965c-f66a2d8bd61c Bound pvc-276acbee-ba6c-4cc9-8bc5-e18525abd256 20Gi RWO sc2-01-vc17c01-wcp-mgmt 188d
sc201vc17pace-workers-wswdh-2hz8w-containerd Bound pvc-e67e3a6f-99d6-4e21-813d-e9c9994b25d6 42Gi RWO sc2-01-vc17c01-wcp-mgmt 139d
sc201vc17pace-workers-wswdh-5pjrc-containerd Bound pvc-fb162388-4347-4f48-825e-c2c2d62ceb90 42Gi RWO sc2-01-vc17c01-wcp-mgmt 139d
sc201vc17pace-workers-wswdh-djp2m-containerd Bound pvc-a7542552-de13-4670-ac45-84ed39c3c916 42Gi RWO sc2-01-vc17c01-wcp-mgmt 139d
sc201vc17pace-workers-wswdh-flwtt-containerd Bound pvc-1b8ee843-709a-4e2a-955d-a9a9a6a83c73 42Gi RWO sc2-01-vc17c01-wcp-mgmt 139d

❯ kg machine -n karvea-vc17ns11
NAME CLUSTER NODENAME PROVIDERID PHASE AGE VERSION
sc201vc17pace-control-plane-zt99l sc201vc17pace sc201vc17pace-control-plane-zt99l vsphere://4201e660-3124-9aa5-4ec2-6fbc2ff3ecea Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-gxmtt vsphere://42013a9b-dffb-4609-89d6-4ca123c4dc1e Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-j4wvp vsphere://4201160b-21c9-ccc2-6826-e3545e34b490 Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-l2dq5 vsphere://420125a8-e45c-04b7-5612-ce3149e86d74 Running 139d v1.20.9+vmware.1
sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv sc201vc17pace sc201vc17pace-workers-jrcb6-85c4844f6c-xqlkv vsphere://4201238f-c9a3-a9b2-9c31-4ed99318bd30 Running 139d v1.20.9+vmware.1

❯ kgtkca | grep karvea
karvea-vc17ns11 sc201vc17pace running 2021-11-19T12:17:24Z v1.20.9+vmware.1-tkg.1.a4cee5b 1 4

Note: The above case is a sample scenario and the reasons why the TKC is stuck at updating may vary based on several conditions. This is a generic method one can follow while approaching these kind of issues. 
 
Hope it was useful. Cheers!

Sunday, July 17, 2022

vSphere with Tanzu using NSX-T - Part16 - Troubleshooting content library related issues

In this article, we will take a look at troubleshooting some of the content library related issues that you may encounter while managing/ administering vSphere with Tanzu clusters.


Case 1:
 
TKC (guest K8s cluster) deployments failing as VMs were not getting deployed. You can see Failed to deploy OVF package error in the VC UI. This was due to error A general system error occurred: HTTP request error: cannot authenticate SSL certificate for host wp-content.vmware.com while syncing content library.
 
 

Following is a sample log for this issue from the vmop-controller-manger:

Warning CreateFailure 5m29s (x26 over 50m) vmware-system-vmop/vmware-system-vmop-controller-manager-85484c67b7-9jncl/virtualmachine-controller deploy from content library failed for image "ob-19344082-tkgs-ova-ubuntu-2004-v1.21.6---vmware.1-tkg.1": POST https://sc2-01-vcxx.xx.xxxx.com:443/rest/com/vmware/vcenter/ovf/library-item/id:8b34e422-cc30-4d44-9d78-367528df0622?~action=deploy: 500 Internal Server Error
This can be resolved by just editing the content library and accepting new certificate thumbprint.
 

Case 2:
 
Missing TKRs. Even though CL is present in the VC and will have all required OVF Templates, on the supervisor cluster TKR resources will be missing/ not found.
❯ kubectl get tkr
No resources found

This could happen if there are duplicate content libraries present in the VC with same Subscription URL. If you find duplicate CLs, try removing them. If there are CLs that are not being used, consider deleting them. Also, try synchronize the CL.

If this doesn't resolve the issue, try to delete and recreate the CL, and make sure you select the newly created CL under Cluster > Configure > Supervisor Cluster > General > Tanzu Kubernetes Grid Service > Content Library.


You may also verify the vmware-system-vmop-controller-manager pod logs and capw-controller-manager pod logs. Check if those pods are running, or getting continuously restarted. If required you may restart those pods.



Case 3:
 

TKC deployments failing as VMs were not getting deployed. Sample vmop-controller-manger logs given below:
E0803 18:51:30.638787       1 vmprovider.go:155] vsphere "msg"="Clone VirtualMachine failed" "error"="deploy from content library failed for image \"ob-18900476-photon-3-k8s-v1.21.6---vmware.1-tkg.1.b3d708a\": deploy error: The operation failed due to An error occurred during host configuration." "vmName"="rkatz-testmigrationvm5/gc-lab-control-plane-kxwn2"

E0803 18:51:30.638821 1 virtualmachine_controller.go:660] VirtualMachine "msg"="Provider failed to create VirtualMachine" "error"="deploy from content library failed for image \"ob-18900476-photon-3-k8s-v1.21.6---vmware.1-tkg.1.b3d708a\": deploy error: The operation failed due to An error occurred during host configuration." "name"="rkatz-testmigrationvm5/gc-lab-control-plane-kxwn2"

E0803 18:51:30.638851 1 virtualmachine_controller.go:358] VirtualMachine "msg"="Failed to reconcile VirtualMachine" "error"="deploy from content library failed for image \"ob-18900476-photon-3-k8s-v1.21.6---vmware.1-tkg.1.b3d708a\": deploy error: The operation failed due to An error occurred during host configuration." "name"="rkatz-testmigrationvm5/gc-lab-control-plane-kxwn2"

E0803 18:51:30.639301 1 controller.go:246] controller "msg"="Reconciler error" "error"="deploy from content library failed for image \"ob-18900476-photon-3-k8s-v1.21.6---vmware.1-tkg.1.b3d708a\": deploy error: The operation failed due to An error occurred during host configuration." "controller"="virtualmachine" "name"="gc-lab-control-plane-kxwn2" "namespace"="rkatz-testmigrationvm5" "reconcilerGroup"="vmoperator.xxxx.com" "reconcilerKind"="VirtualMachine"

This could be resolved by restarting the cm-inventory service on all nsx-t manager nodes. Following are the commands to restart cm-inventory service on NSX-T manager nodes:
get service cm-inventory  
restart service cm-inventory

Case 4: 
Sometimes in the WCP K8s layer you will notice some stale contentsources object entries. Contentsources are the corresponding objects of content libraries in K8s layer. Due to some reasons/ requirements you might have created multiple content libraries, and you may have delete some of them at later point of time from the vCenter, but they may not be removed properly from the WCP K8s layer and thats how these stale contentsources objects are found. You can use PowerCLI to list the current content libraries present in the VC, compare it with the contentsources and remove the stale entries.
> Get-ContentLibrary | select Name,Id | fl

Name : wdc-01-vc18c01-wcp
Id   : 17209f4b-3f7f-4bcb-aeaf-fd0b53b66d0d

> kg contentsources NAME AGE 0f00d3fa-de54-4630-bc99-aa13ccbe93db 173d 17209f4b-3f7f-4bcb-aeaf-fd0b53b66d0d 321d 451ce3f3-49d7-47d3-9a04-2839c5e5c662 242d 75e0668c-0cdc-421e-965d-fd736187cc57 173d 818c8700-efa4-416b-b78f-5f22e9555952 173d 9abbd108-aeb3-4b50-b074-9e6c00473b02 173d a6cd1685-49bf-455f-a316-65bcdefac7cf 173d acff9a91-0966-4793-9c3a-eb5272b802bd 242d fcc08a43-1555-4794-a1ae-551753af9c03 173d

In the above sample case you can see multiple contentsource objects, but there is only one content library. So you can delete all the contentsource objects, except 17209f4b-3f7f-4bcb-aeaf-fd0b53b66d0d.

Hope it was useful. Cheers!