vRealize Operations Manager 7.5 - Part4 - High availability

In this post, I will explain the steps to expand an existing vROps installation and enable high availability.

Before making a design/ architecture decision on enabling high availability for vROps I strongly recommend you to go through the below VMware vROps documentation links and understand the functional/ technical implications of it.

1. About vRealize Operations Manager High Availability
2. High Availability Considerations
3. About vRealize Operations Manager Cluster Nodes

Expand an existing installation

Deploy a new vROps appliance. Once the deployment is complete, open the management IP of the appliance in a web browser. This time select expand an existing installation. 

Click next.

Provide a name for this new node.

Select the node type as "Data".

Provide the IP address or FQDN of the master node and click validate.

Accept the certificate and click next.

Provide admin password and click next.

Note: If you don't know the admin password you can request the vROps admin to provide a shared pass-phrase and can use it.

Click finish.

After this step, you will be redirected automatically to the admin page.

As you can see in the above screenshot, installation is in progress and is waiting to finish the cluster expansion. It may take a few minutes. Once it is complete you can see a button to "Finish adding new node(s)".

Click "Finish adding new node(s)" and click ok.

This will take a few minutes.

Now, you can see that the new data node is online and running. Next step is to enable high availability.  

Enable High Availability

To configure high availability, click "Enable".

Cluster Restart Required: The cluster needs to be restarted in order to configure HA. This may require up to 20 minutes during which vRealize Operations Manager will not be available.

To ensure complete protection the two nodes (Master and Replica) should not share hardware.

Click Ok.

Click "Yes" to continue HA configuration.

This will take a few minutes. The cluster will be taken offline for enabling HA.

After a few minutes, the cluster is back online and HA is enabled. And as you can see in the below screenshot one node is "Master" and the other one is "Master Replica".

vROps also has dashboards that provide you details on the health status of the complete vROps environment, cluster statistics and performance details of vROps itself, etc. Sample screenshot of the "Self Health" dashboard is shown below.  

Hope it was useful. Cheers!

Related posts:

vRealize Operations Manager 7.5 - Part3
vRealize Operations Manager 7.5 - Part2
vRealize Operations Manager 7.5 - Part1

vRealize Operations Manager 7.5 - Part3 - Rightsizing

In this article, I will briefly explain a performance optimization feature in vROps. This feature will help the user/ customer to easily find out a list of oversized and undersized VMs. vROps will provide recommendations on allocating the right amount of resources to the VM. 

Rightsizing

As you can see in the screenshot above, there are 29 VMs that are oversized. And vROps is providing recommendations on the amount of CPU and memory reduction that can be done to optimize performance. Oversizing always have a negative impact on the performance and it is recommended to allocate the right amount of resources to a VM for optimal performance. Let's take an example of one of the VM. 

You can see that the recommendation by vROps is to reduce 8 vCPUs and 15 GB of memory. This recommendation is based on the analytics and forecasting capabilities of vROps. You can click on the VM name and it will show more details regarding the selected VM.

vROps also provides a way to resize the VMs directly from the console. You can select the VMs that you would like to resize, and click "RESIZE VM(S)".

NOTE: The workloads may be interrupted as it may require restart during resizing. 

VMware guidance: CPU Ready time and Co-Stop values per core greater than 5% and 3% respectively could be a performance concern. 

Hope it was useful. Cheers!

Related posts:

Real-time VMware VM resource monitoring using PowerShell

vRealize Operations Manager 7.5 - Part2

vRealize Operations Manager 7.5 - Part1

vRealize Operations Manager 7.5 - Part2 - Configure vCenter adapter and dashboards overview

In this post, I will explain how to configure the vCenter adapter and will also walk through some of the native dashboards.

Configuring vCenter adapter

• Login to vROps.
• Click the Administration tab.
• Select the vCenter Adapter. 
• Click the gears icon.

• Provide necessary details.

• Test connection.

• Click save settings and close.
• Once the above steps are done, in a few seconds you can see "Adapter Status" as Data receiving and "Collection State" as Collecting.  

Note: After configuring the vCenter adapter you should actually wait for few days for all the data to get collected and populated.

Dashboards

This is the place where most of the System administrators/ Operations Engineers spend their time for understanding/ evaluating the operational aspects of their virtual infrastructure, capacity planning, troubleshooting various issues, performance optimizations, etc.  vROps has many pre-canned dashboards that you get out-of-the-box. Below screenshot shows how to select/ navigate multiple dashboards that are available in vROps.

Now, I will just briefly explain some of my favorite dashboards. 

Operations Overview

This dashboard provides data center summary. It provides info about the total number of clusters, hosts, total VMs, running VMs, datastores, etc. This dashboard also has widgets showing details about the top VMs experiencing CPU contention, memory contention, and disk latency.

Utilization Overview

This dashboard provides a summary of the environment based on the selection. In this case, I selected a cluster. It shows the total (CPU/ memory/ storage) capacity of the selected environment, usable capacity, used capacity, remaining capacity, etc. This will be very useful for capacity planning of resources.  

Cluster Utilization

This dashboard shows the CPU, memory, disk IOPS and network usage trends at the cluster level.

Datastore Utilization

This dashboard provides detailed info on datastore usage trends and heatmap based on datastore capacity/ utilization.

Heavy Hitter VMs

This dashboard provides cluster-level CPU, memory, IOPS and network throughput. It also gives a list of VMs which has generated the highest CPU demand, memory demand, highest IOPS and network throughput. This is very useful for identifying the VMs that has the highest resource consumption. 

Hope it was useful. Cheers!

Related posts:

vRealize Operations Manager 7.5 - Part1

vRealize Operations Manager 7.5 - Part1 - Installation

For evaluation, you can download a trial version of vROps 7.5.

Installation

• Log in to VCSA.
• Select an ESXi host and Deploy OVF Template.
• Browse and select the vROps 7.5 OVA file.
• Provide a name and select a location.
• Select a host and click next.

Now, if you are using a Chrome browser and if you haven't opened your VCSA with FQDN name, you might face the below error, "Transfer failed: The OVF descriptor is not available".

A workaround for the above issue is to open and login VCSA with FQDN using Firefox browser.

• Perform the above same steps and this time you will not get the above error.

• Accept the license agreements.
• Select a deployment configuration.

• Select storage.

• Select a destination network.
• Provide time zone and network details (You can leave network properties blank if you have a DHCP server configured in the destination network selected in the above step). Click next and finish.
• Once the OVF template deployment is completed you can power on the VM.
• Open the console to view installation progress. It will take a few minutes.

• Once the installation is complete you will get the console screen as below. To proceed to the next stage of the installation process open the IP in a web browser.

• You will get the below options. As it is a fresh installation I prefer to go with Express Installation as it is the fastest way to deploy it with minimal inputs.

• Click next on the getting started page.
• Set the admin account password, click next and finish.

• Accept EULA.
• Enter a product key or you can continue in evaluation mode.
• Click next and finish.

Hope it was useful. Cheers!

Related posts

vRealize Operations Manager 7.5 - Part2 - Configure vCenter adapter and dashboards overview

vRealize Operations Manager 7.5 - Part3 - Rightsizing

vRealize Operations Manager 7.5 - Part4 - High availability

vRealize Operations Manager 7.5 - Part5 - Alerting

vRealize Operations Manager 7.5 - Part6 - Adding new symptoms and alert definitions

vRealize Operations Manager 7.5 - Part7 - vSAN monitoring and troubleshooting

vRealize Operations Manager 7.5 - Part8 - Super Metrics

References

vROps 7.5 reference architecture

vROps documentation

VMware PowerCLI 101 - Part3 - Basic VM operations

Previous posts of this blog series talked about how to install PowerCLI, connecting to ESXi host and basics of working with the vCenter server. In this article, we will go through basic VM operations.

Get basic VM details:
Get-VM -Name <name of the virtual machine>

To view all properties of a VM object:
Get-VM -Name <name of the virtual machine> | Get-Member

To start a VM:
Get-VM -Name <name of the virtual machine> | Start-VM

To restart a VM:
Get-VM -Name <name of the virtual machine> | Restart-VMGuest

To shut down a VM:
Get-VM -Name <name of the virtual machine> | Shutdown-VMGuest

To delete a VM permanently:
Get-VM -Name <name of the virtual machine> | Remove-VM -DeletePermanently

Let's have a look into the "ExtensionData" property of a virtual machine.

Status related details of a VM:
(Get-VM -Name <name of the virtual machine>).ExtensionData | select GuestHeartbeatStatus,OverallStatus,ConfigStatus

CPU, Memory config details of a VM:
(Get-VM -Name <name of the virtual machine>).ExtensionData.Config.Hardware

CPU, Memory hot add/ remove features:

Layout details of a VM:
(Get-VM -Name <name of the virtual machine>).ExtensionData.LayoutEx.File | sort Key | ft

VM tools status and other guest details:
(Get-VM -Name <name of the virtual machine>).ExtensionData.Guest

Network related info of a VM:

(Get-VM -Name <name of the virtual machine>).ExtensionData.Guest.Net

Hope this was useful. Cheers!

VMware PowerCLI 101 - Part2 - Working with vCenter server

In my previous blog, we discussed how to install PowerCLI module and connect to a stand-alone ESXi host. Now let's start with connecting to the vCenter server.

Connect-VIServer <IP of vCenter server>

Get the list of data centers present under this vCenter server: Get-Datacenter

Get the list of clusters under a datacenter: Get-Datacenter DC01 | Get-Cluster

To verify the status of HA, DRS, and vSAN of a cluster:

(Get-Cluster Cluster01) | select Name,DrsEnabled,DrsAutomationLevel,HAEnabled,HAFailoverLevel,VsanEnabled

Get the list of ESXi hosts part of a specific cluster: 

Get-Datacenter DC01 | Get-Cluster Cluster01 | Get-VMHost

To get the list of VMs hosted on a specific ESXi host:

Get-Datacenter DC01 | Get-Cluster Cluster01 | Get-VMHost 192.168.105.11 | Get-VM

To get a list of powered on and powered off VMs:

(Get-Cluster Cluster01 | Get-VM).where{$PSItem.PowerState -eq "PoweredOn"}

(Get-Cluster Cluster01 | Get-VM).where{$PSItem.PowerState -eq "PoweredOff"}

An efficient way of doing it in a single go is given below:

$vmson, $vmsoff = (Get-Cluster Cluster01 | Get-VM).where({$PSItem.PowerState -eq "PoweredOn"}, 'split')

$vmson will have the list of VMs that are PoweredOn and $vmsoff will have the list of VMs that are PoweredOff.

Cluster level inventory:

Get-Cluster | Get-Inventory

Datastore details of a cluster:

Get-Cluster | Get-Datastore | select Name, FreeSpaceGB, CapacityGB, FileSystemVersion, State

Hope this was useful. Cheers! In the next post, we will talk about performing basic VM operations using PowerCLI.